Mitel Forums > Aastra - MiVoice Office 400 and MiVoice MX-One
MITEL 6865i problem : Cfg Svr Failure
Cedric:
Hi,
It's working after deleting the local config and a factory reset ! Sometimes it's better to start from the beginning to save time... ;)
The difference I have seen in the local.cfg and server.cfg on the phone :
- HTTP digest password has changed, but It's configured with "http digest force login 0", according to the documentation that means it's disabled, so I think it does not matter.
- was "http digest password: 14563475"
- now "http digest password: YoEhEA63dPskfn5EI0lNfJxjaojbu6V7"
- VLAN config is now in the server.cfg file and before in the local.cfg file. I guess it's normal because the authentication was wrong before, but I am not sure...
However, the phone was configured in the same way for 1 month, idem for the switch port and vlan config, and it was not working only since the end of last week.
Thank you for your help, it was very helpful !
Have a good day,
Cédric
Navigation
[0] Message Index
[*] Previous page
Go to full version