Hi Everyone.
We have not been able to call other countries but North America from Taiwan since we installed MiVoice.
Our ISDN is configured as NI2 Bellcore.
TSP trace shows the cause code:
4 1------- Extension bit : Not Continued
-1100100 Cause code : Invalid information element contents
The Telco says they need to see "sending completed" command in the setup message from our PBX.
My research shows this is a one-line command you can enter on a Cisco router. However, I don't see anything remotely equivalent on the MiVoice system.
I thought of ending the digit string with a "#" but it didn't complete the call either.
Any ideas?
