« previous next »
Pages: [1]   Go Down

Author Topic: Upgrade from 6.0 SP3 to 7.2 SP1 PR2  (Read 978 times)

Offline JasonTL

  • Sr. Member
  • ****
  • Posts: 208
  • Country: us
  • Karma: +0/-1
    • View Profile
Upgrade from 6.0 SP3 to 7.2 SP1 PR2
« on: January 13, 2017, 03:23:35 PM »
Is it possible to restore a backup of a system on 6.0 SP3 to a system with a new install on 7.2 SP1 PR2? I was curious if backups of an older version could be restored on a newer version software load.
Logged

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4100
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Upgrade from 6.0 SP3 to 7.2 SP1 PR2
« Reply #1 on: January 13, 2017, 05:31:21 PM »
Quote from: JasonTL on January 13, 2017, 03:23:35 PM
Is it possible to restore a backup of a system on 6.0 SP3 to a system with a new install on 7.2 SP1 PR2? I was curious if backups of an older version could be restored on a newer version software load.
Yes... anything MCD 4.2 or later can be restored into any later software version. Versions prior to MCD 4.0 must be upgraded to MCD 4.0 and converted to the new database type, and can then be upgraded into anything newer.
Logged

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Upgrade from 6.0 SP3 to 7.2 SP1 PR2
« Reply #2 on: January 19, 2017, 09:13:42 AM »
6.0 SP3 to 7.2 SP1 PR2 is no problem. For specifics on what other versions can be upgraded to what, check the release notes of the version you want to upgrade to, there should be a table laying out the guidelines.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10