« previous next »
Pages: [1]   Go Down

Author Topic: Fxs Number location in Mitel 5000  (Read 1043 times)

Offline eia

  • Jr. Member
  • **
  • Posts: 34
  • Country: us
  • Karma: +0/-0
    • View Profile
Fxs Number location in Mitel 5000
« on: December 05, 2016, 01:15:24 PM »
We are testing with our ISP and I need to change the number to be used for the testing.
We have the number set up in the router but i'm not sure where to find the associated setup in the Mitel DB programming
Any help is appreciated. Thanks

Here is the snippet from the router:

voice user 8004441212
  connect fxs 0/2
Logged

Offline dwayneg

  • Hero Member
  • *****
  • Posts: 612
  • Country: us
  • Karma: +29/-1
    • View Profile
Re: Fxs Number location in Mitel 5000
« Reply #1 on: December 05, 2016, 01:32:09 PM »
You might be looking for SYSTEM/DEVICES AND FEATURE CODES/SIP PEERS/SIP TRUNK GROUPS/<TG you're using>/CALLING PARTY NUMBER.  There's also a similar setting within each station, if you're sending different numbers for each station.
Logged

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: Fxs Number location in Mitel 5000
« Reply #2 on: December 06, 2016, 03:29:23 AM »
That sounds like you have an analogue output from the router. (FXS 0/2) is there a port with that label?
This would have to connect to an LS port on the 5000. You then have to program the Trunk and group accordingly.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10