Author Topic: My Mitel CX 3300 box stopped working! please help!  (Read 3049 times)

Offline renantea

  • Contributer
  • *
  • Posts: 26
  • Country: bh
  • Karma: +0/-0
    • View Profile
My Mitel CX 3300 box stopped working! please help!
« on: November 20, 2016, 06:45:09 AM »
Hello,

Our Mitel box (3300 CX II) has been running fine for years, but just suddenly it stopped. Really don't know what happened but I can no longer access it via the web interface! Tried a hard before, no luck. Tried to reset, no luck. I can only ping it. At some point, I also thought the box might be rebooting itself. And the T1/E1 MMC module doesn't have any LED activity at all.

Please help! Any advice will be greatly appreciated.


Offline markyb73

  • Full Member
  • ***
  • Posts: 102
  • Karma: +5/-0
    • View Profile
Re: My Mitel CX 3300 box stopped working! please help!
« Reply #1 on: November 20, 2016, 07:13:39 AM »
maybe the hard drive has died.
You will need to plug a 9 way RS232 cable into the maintenance port on the front and connect with something like putty to see what the messages are, that will give you an idea what it is doing or trying to do.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: My Mitel CX 3300 box stopped working! please help!
« Reply #2 on: November 20, 2016, 07:25:08 AM »
markyb73 is exactly right.  You'll need to connect to the system with a serial cable to watch to see what it's doing.
I'm suspecting you'll need to replace the hard drive.  You should be contacting your dealer right away.  You're going to need their help.

Ralph

Offline renantea

  • Contributer
  • *
  • Posts: 26
  • Country: bh
  • Karma: +0/-0
    • View Profile
Re: My Mitel CX 3300 box stopped working! please help!
« Reply #3 on: November 20, 2016, 08:24:51 AM »
Thanks for the tip Ralph and Marky. Time to find that serial cable. :) Will update it here as soon as I have some results.

Thanks!

Offline renantea

  • Contributer
  • *
  • Posts: 26
  • Country: bh
  • Karma: +0/-0
    • View Profile
Re: My Mitel CX 3300 box stopped working! please help!
« Reply #4 on: November 21, 2016, 01:22:24 AM »
Okay. So I managed to get a copy of the PBX log but I really don't understand it. But I do get these error messages:

...

0x3d61c40 (tAppStartup): read DMA err: dma status=0x20 regValue=0x0a01 semSta tus=0 PCI Status=0x00 aSTATUS=0x51
0x3d61c40 (tAppStartup): read DMA err: dma status=0x20 regValue=0x0a01 semStatus =0 PCI Status=0x00 aSTATUS=0x51
0x3d61c40 (tAppStartup): read DMA err: dma status=0x20 regValue=0x0a01 semStatus =0 PCI Status=0x00 aSTATUS=0x51

...

Setting Emulator to LARGE configuration.
ERR-Software: 2016/11/21 08:52:31: Main: call_server_main.c(1293): HAL: Unexpected Result->LoadFile()
Open file failure. File: /db/sxip3kinit.run
ERR-Software: 2016/11/21 08:52:31: Main: port2vxworks.c(542): HAL: CallServer Initialization failed.  System will reboot.


Call Engine Layer Coordinator FAILED to start.


-> Task StartupHwRst being deleted while ACTIVE
WARNING-System shutdown requested by task: tAppStartup

...

What does this mean?

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: My Mitel CX 3300 box stopped working! please help!
« Reply #5 on: November 21, 2016, 04:00:49 AM »
Those first errors look like a bad HDD.
Do you have a recent backup?

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: My Mitel CX 3300 box stopped working! please help!
« Reply #6 on: November 21, 2016, 08:45:34 AM »
I agree.  That looks like a bad hard drive.
It will need to be replaced.

Ralph

Offline renantea

  • Contributer
  • *
  • Posts: 26
  • Country: bh
  • Karma: +0/-0
    • View Profile
Re: My Mitel CX 3300 box stopped working! please help!
« Reply #7 on: November 23, 2016, 09:00:59 AM »
Okay so we've managed to install the software back. but we're still having problems receiving/making calls. The T1/E1 module only gives a solid RED status.

I got this error message from the maintenance log:

Programming mismatch for ASU on CIM: 1, installed: UK COMBO, programmed: UNKNOWN

Any ideas?

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: My Mitel CX 3300 box stopped working! please help!
« Reply #8 on: November 23, 2016, 09:57:22 AM »
I'm not sure but it looks like your T1 card may have been installed in the wrong slot.

Ralph

Offline renantea

  • Contributer
  • *
  • Posts: 26
  • Country: bh
  • Karma: +0/-0
    • View Profile
Re: My Mitel CX 3300 box stopped working! please help!
« Reply #9 on: November 24, 2016, 01:32:04 AM »
One of our tech guys is saying that it might be a T1/E1 card problem. However, I am unsure about this. I checked the Hardware modules form an I can see the card there. Could it be that there might be something wrong with the programming of the Digital Trunk?

My head is about to explode now and I am really confused.  :-\

Please see screenshots for the error log.

Can anyone guide me.  :'(

« Last Edit: November 24, 2016, 03:26:15 AM by renantea »

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: My Mitel CX 3300 box stopped working! please help!
« Reply #10 on: November 24, 2016, 09:14:25 AM »
It looks like it programmed correctly.
Something that happens every once in a while is if your system if down for a while, the carrier will take the E1/T1 out of service so it stops giving them alarms on their end.  You may want to call them next.

Ralph

Offline renantea

  • Contributer
  • *
  • Posts: 26
  • Country: bh
  • Karma: +0/-0
    • View Profile
Re: My Mitel CX 3300 box stopped working! please help!
« Reply #11 on: November 24, 2016, 09:24:21 AM »
Thanks ralph... And i am so relieved! Just a few minutes back everything's restored. Thanks a lot for all your inputs.   :) :) :) :) :)


 

Sitemap 1 2 3 4 5 6 7 8 9 10