Author Topic: MiVB 8  (Read 2426 times)

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1215
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
MiVB 8
« on: November 01, 2016, 02:55:29 PM »
Just checked MOL, it's actually there on the announced release date. Been a while since that's happened. Do I dare load it in my lab?


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: MiVB 8
« Reply #1 on: November 01, 2016, 03:46:31 PM »
Oooooo....
Take a deep breath, perhaps a deep swig and dig in.
If you survive let us know what you think.

Ralph

Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: MiVB 8
« Reply #2 on: November 01, 2016, 05:44:12 PM »
If it's there on the release date then usually within a day or two it's pulled due to a major bug   ::) ::) ::)

If it comes out a few days late, then usually it wont have a major bug.

Well that's just my view on it based on past releases!

Offline petr.necas

  • Sr. Member
  • ****
  • Posts: 393
  • Country: cz
  • Karma: +8/-0
    • View Profile
Re: MiVB 8
« Reply #3 on: November 02, 2016, 08:31:11 AM »
I installed the relese 8.0 in my lab and tested some of the new features, but it seems the Call Pickup Display does not work correctly. Could anybody retest it before I write to Mitel, please?.

In the system administration help there is "To complete the pickup, press Pickup or the Call Pickup feature access key again.". When I enter the "Call Pickup - Dialed" FAC the phone shows the caller but when I enter the FAS again nothing happens.



Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: MiVB 8
« Reply #4 on: November 02, 2016, 09:34:31 AM »
I installed the relese 8.0 in my lab and tested some of the new features, but it seems the Call Pickup Display does not work correctly. Could anybody retest it before I write to Mitel, please?.

In the system administration help there is "To complete the pickup, press Pickup or the Call Pickup feature access key again.". When I enter the "Call Pickup - Dialed" FAC the phone shows the caller but when I enter the FAS again nothing happens.
Some of these feature require the key to be used... try it with an actual key programmed with the feature or use the softkey, the FAC may not perform the exact same function.

Offline petr.necas

  • Sr. Member
  • ****
  • Posts: 393
  • Country: cz
  • Karma: +8/-0
    • View Profile
Re: MiVB 8
« Reply #5 on: November 02, 2016, 09:43:50 AM »
I tested this already, the programmed Pickup key works just fine when pressed the 2nd time.

Offline petr.necas

  • Sr. Member
  • ****
  • Posts: 393
  • Country: cz
  • Karma: +8/-0
    • View Profile
Re: MiVB 8
« Reply #6 on: November 10, 2016, 07:51:11 AM »
Any had chance to test it already? Thank you

Offline iboyd

  • Jr. Member
  • **
  • Posts: 61
  • Country: us
  • Karma: +1/-0
    • View Profile
Re: MiVB 8
« Reply #7 on: November 10, 2016, 12:14:16 PM »
Are you guys already dealers or partners with Mitel in some way??

How do you go about establishing that relationship? My boss and I are starting to look into doing the install and configuring ourselves.

Thanks,
-Ian

Offline petr.necas

  • Sr. Member
  • ****
  • Posts: 393
  • Country: cz
  • Karma: +8/-0
    • View Profile
Re: MiVB 8
« Reply #8 on: November 12, 2016, 01:55:05 AM »
Hi Ian, yes, in our case, we are Mitel partner. Regarding out Mitel history it is a long story ;-). For you probably the best way is to contact Mitel and ask them about options.

http://www.mitel.com/contact-mitel

Offline iboyd

  • Jr. Member
  • **
  • Posts: 61
  • Country: us
  • Karma: +1/-0
    • View Profile
Re: MiVB 8
« Reply #9 on: November 14, 2016, 12:44:46 PM »
Thanks Petr.necas.

I think after the next Conference I will start that conversation.

-Ian

Offline mszodiac

  • Sr. Member
  • ****
  • Posts: 232
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: MiVB 8
« Reply #10 on: November 16, 2016, 11:40:19 AM »
Has anyone come across other issues on this release other than what's mentioned above?

We're still running 7.2 on the majority of our systems which we find to be very stable.

Offline petr.necas

  • Sr. Member
  • ****
  • Posts: 393
  • Country: cz
  • Karma: +8/-0
    • View Profile
Re: MiVB 8
« Reply #11 on: November 16, 2016, 01:18:24 PM »
I still hope that somebody will test the issue with the pickup FAC I described earlier. We have upgraded our virtual MiVoice Business to 8.0 already and did not find any issue, except some missing links in the online help. Probably tomorrow we will upgrade our company CX. I will retest the pickup then.   


 

Sitemap 1 2 3 4 5 6 7 8 9 10