Author Topic: program Cetis SIP Phones on a Mitel 3300.  (Read 1775 times)

Offline gimitel

  • Sr. Member
  • ****
  • Posts: 205
  • Karma: +0/-0
    • View Profile
program Cetis SIP Phones on a Mitel 3300.
« on: September 30, 2016, 11:32:19 PM »
Hi Mitel Friends
I need to program Cetis SIP Phones on a Mitel 3300.
Can someone guide me through how to program these type of sip phones on Mitel 3300.
These Cetis phones are hotel room phones.
What I already did was programming a sip device capabilities, but was wondering if I need to use generic sip phones at device type when programming its User and Services Configuration ?

Please advise


Offline petr.necas

  • Sr. Member
  • ****
  • Posts: 393
  • Country: cz
  • Karma: +8/-0
    • View Profile
Re: program Cetis SIP Phones on a Mitel 3300.
« Reply #1 on: October 26, 2016, 10:57:46 AM »
Hello, we configured Cetis phones recently and used Device Type = Generic SIP Phone and it worked fine. Do you have any specific issues with the configuration?

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: program Cetis SIP Phones on a Mitel 3300.
« Reply #2 on: October 26, 2016, 11:00:10 AM »
You need to both set up a SIP Device Capabilities profile to tell the system which SIP features the endpoint is capable of, and also assign the set as a "Generic SIP Device" in User and Device Configuration so that you can apply the SIP Device Capability profile to the set.

Offline petr.necas

  • Sr. Member
  • ****
  • Posts: 393
  • Country: cz
  • Karma: +8/-0
    • View Profile
Re: program Cetis SIP Phones on a Mitel 3300.
« Reply #3 on: October 26, 2016, 11:24:20 AM »
lundah is right. We also set the following option in SIP Device Capabilities fro the Cetis phones:

Prevent the Use of IP Address 0.0.0.0 in SDP Messages      Yes

Did you change any other option?


 

Sitemap 1 2 3 4 5 6 7 8 9 10