Mitel Forums > SIP On Mitel

5320/5340 SIP Firmware

(1/2) > >>

is99:
Hi guys

I have a bunch of phones with version 5
I'm looking for something a bit newer

Thanks a lot

sarond:
user 'dilkie' has been kind enough to provide instructions on how to update the firmware.

http://mitelforums.com/forum/index.php?topic=8742.msg38460#msg38460

is99:
Thanks a lot I sow that tread, but I'm afraid that because I have a very old version my phones won't upgrade properly to the version on that system.
So ideally I'm looking for all the versions from 5 to the latest and will do TFTP upgrade "jumping" only from one version to the next one.

acejavelin:

--- Quote from: is99 on September 16, 2016, 10:32:07 AM ---Thanks a lot I sow that tread, but I'm afraid that because I have a very old version my phones won't upgrade properly to the version on that system.
So ideally I'm looking for all the versions from 5 to the latest and will do TFTP upgrade "jumping" only from one version to the next one.

--- End quote ---
I don't think you understand, put them back into MiNET mode, activate Teleworker mode, then upgrade them... Once the upgrade is done, switch them back to SIP mode.

Unless your MiNET version is VERY old, meaning from a pre version 7.0 3300 PBX (not MCD), about 2002-2003, they should upgrade fine, the "step by step" upgrade procedure doesnt apply to MiNET mode in general.

is99:
I do understand what needs to be done, but I wasn't sure about the version jump.

Anyway I already tried  this method on one of the phones a couple of hours ago and it worked fine.

But I'm still a bit confused. After everything was done I got a new logo and the legal notice at the bottom of the screen during boot now say 2016, but the version is 6.xxxx
I thought that the latest version available was supposed to be 8.xxx ?

Navigation

[0] Message Index

[#] Next page