« previous next »
Pages: [1]   Go Down

Author Topic: Mitel IP Phones on Cisco Switch  (Read 9033 times)

Offline gimitel

  • Sr. Member
  • ****
  • Posts: 205
  • Karma: +0/-0
    • View Profile
Mitel IP Phones on Cisco Switch
« on: August 18, 2010, 09:36:06 PM »
Guys,

I program auto Qos on all ports on a cisco switch. I also program two vlan on the ports one for data and the other for voice.
Will i get technical problems by enable auto qos on the cisco switch?

Thanks,

Gimitel
Logged

Offline glennmitel

  • Jr. Member
  • **
  • Posts: 54
  • Karma: +1/-0
    • View Profile
    • Capital support
Re: Mitel IP Phones on Cisco Switch
« Reply #1 on: August 19, 2010, 10:25:06 AM »
just make sure that if you setup the L2 qos on the Mitel 2 6 match it on the switch


switchport mode access
switchport access voice vlan xxx


then apply qos to the port and the vlan that way you cant go wrong
Logged

Offline Mitel100

  • Sr. Member
  • ****
  • Posts: 262
  • Country: gb
  • Karma: +6/-0
    • View Profile
Re: Mitel IP Phones on Cisco Switch
« Reply #2 on: August 19, 2010, 04:09:28 PM »
Auto QOS will mark voice as COS of 5 on the cisco switch, as glenmitel says just make sure that the mitel priorities reflect this.
Logged

Offline Chakara

  • Hero Member
  • *****
  • Posts: 607
  • Karma: +2/-0
    • View Profile
    • Kyle Petree
Re: Mitel IP Phones on Cisco Switch
« Reply #3 on: August 19, 2010, 11:09:02 PM »
Ditto!

-Chak
Logged

Offline gimitel

  • Sr. Member
  • ****
  • Posts: 205
  • Karma: +0/-0
    • View Profile
Re: Mitel IP Phones on Cisco Switch
« Reply #4 on: August 20, 2010, 09:30:21 AM »
thanks guys
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10