« previous next »
Pages: [1]   Go Down

Author Topic: cannot make outgoing calls  (Read 3379 times)

Offline ramachandran

  • New Member
  • *
  • Posts: 4
  • Country: us
  • Karma: +0/-0
    • View Profile
cannot make outgoing calls
« on: September 23, 2016, 10:47:57 AM »
Just installed a brand new Mitel 5312 on a SX 200 ICP. The phone cannot make outbound calls. It seems to have the same cos and Cor as the other phones. Cannot dial out when 9 is pressed for an outside line. I get an outside dial tone but cannot call out. As soon as the number is dialed I get a fast busy signal. Am I missing something..is it on the 5312 phone or on the ICP controller?

Logged

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: cannot make outgoing calls
« Reply #1 on: September 23, 2016, 11:05:30 AM »
It's not a problem with device itself.
If your COS and COR match a known working phone then next be sure it's in the same tenant.
Then, depending on your trunks, you may need to ensure you have a valid DID for it.

Ralph
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10