Mitel Forums > SIP On Mitel

Setting up SIP, but first TFTP...

(1/3) > >>

afanencoo:
Hi Guys,

I've been reading through some of the threads here and you guys seem like a friendly bunch, so I would like to ask a hand.

I've gotten a hold of Mitel 5360 (Main: 3.0.2.5 Boot: 3.0.2.5) and put it into SIP mode after a factory reset.

I get the  message "SIP not available. Install newer", which apparently means I need to update the firmware.

I tried setting a static address on the phone to my laptop running a TFTP server.
When I enter TFTP update mode, I get "L2&Boot Err."

I have looked this up and it looks like it's a DHCP error.

Can anyone suggest a solution or DHCP option I should be applying to get this phone booting in SIP mode?

Thanks in advanced!

dilkie:
easiest thing to do is.

* put the phone back into minet mode
* put the phone in teleworker mode(*) and point at some MBG or MCD, you can use mine at 216.191.234.111, if you don't have one
* reboot phone, it will download and upgrade it's f/w (multiple steps for such a big jump, have patience)
* after reboot, put back into sip mode, sip and minet s/w is contained in same f/w image.
(*) put a phone in teleworker mode by holding down '7' key when powering up.  Follow the directions to enter the mbg ip address. After upgrade, disable teleworker mode with same process, use the "delete" command.

afanencoo:
You're awesome and I'll have you know you made my day!
Thanks for your instructions! :D

carlos@sip:
Good day..also trying to upgrade firmware on a 5330..is 216.191.234.111 server still available? if so can you confirm or send TW password? tks.

sarond:
You do not need the TW Password to have the FW upgrade.

Navigation

[0] Message Index

[#] Next page