Mitel Forums > Non-Mitel Chatter

Plantronics Savi 700 series

(1/1)

Gasmanz:
Has anyone been able to get the base of the Plantronics Savi 700 series to connect via bluetooth to a Mitel 5330/5340/5360 bluetooth module?

When you do the pairing they see each other and the Mitel phone is asked to put in a pass code which is meant to be 0000 but upon authentication it says invalid code. I have tried 1234 and blank but they don't work either  :'(

Any help would be appreciated  :)

PC77375:
Confused- why are you pairing the base to the bluetooth phone module? They connect via cable, as far as I know. I have a Savi 740 in my possession and can test as well, if you let me know what method you have used.

Gasmanz:
This is for EHS. When using the cable you need a lifter which is ugly  :D

lundah:

--- Quote from: Gasmanz on November 23, 2016, 03:32:00 PM ---This is for EHS. When using the cable you need a lifter which is ugly  :D

--- End quote ---

For the 53xx series sets, you need to use a lifter for anything except the Mitel brand headsets.

Navigation

[0] Message Index