Unused DDI's?

[rm4g00]

Hello guys/gals,

Does anyone know a method to check for unused DDI's? ie last logged in or a command via the maintenance module to cross reference an old account for usage for a new user?

Thanks alot,

Rm4g00

   

Release level: 6.0 SP1
    Active software load: 12.0.1.24
    Inactive software load: Not available.
    System relink: No relink has been applied.
    Call Control relink: No relink has been applied.
    Platform: MXe, 512MB of RAM

[ralph]

If your DID range is, for example, 1000 to 1999, then in maintenance enter this command:
Loc all fre dn 1000 to 1999

it will show you the unused numbers in that range.

Ralph

[VinceWhirlwind]

Something I've been meaning to find out for sure and write down in my support manual:
When you run the above command, what numbers are not shown that could potentially be in use in other ways?
Multiline keys?
Single line keys?
System speed calls?
...?

[ralph]

It shows all unused numbers within the range.
If it's on a button, speed dial or ARS then it will not show it.

Ralph