Author Topic: ISDN Layer 2 Status: DOWN  (Read 2729 times)

Offline petr.necas

  • Sr. Member
  • ****
  • Posts: 393
  • Country: cz
  • Karma: +8/-0
    • View Profile
ISDN Layer 2 Status: DOWN
« on: June 15, 2016, 11:21:39 AM »
Could you please give me hint what to check if the EDT SHOW LINK STATUS ALL returns following? My understanding is that the cable (Layer 1) is correctly plugged in but the config may seem wrong.

PRI Logical link number: 1
Layer 1 Status:  GREEN
Layer 2 Status:  DOWN
Interface Activated: TRUE

Thanks


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: ISDN Layer 2 Status: DOWN
« Reply #1 on: June 15, 2016, 03:10:49 PM »
Layer 2 is, in my experience, the D-channel for the ISDN service on the circuit. I normally see that if the telco has the circuit busied out or otherwise out of service at the CO switch side.

Offline petr.necas

  • Sr. Member
  • ****
  • Posts: 393
  • Country: cz
  • Karma: +8/-0
    • View Profile
Re: ISDN Layer 2 Status: DOWN
« Reply #2 on: June 27, 2016, 05:06:19 AM »
You were right, the line was placed in service by remote side, now it is up.

PRI Logical link number: 1
Layer 1 Status:  GREEN
Layer 2 Status:  UP
Interface Activated: TRUE

Thank you

 


 

Sitemap 1 2 3 4 5 6 7 8 9 10