Ring Two Phones, Even when in Use

[Hershel]

trying to figure out the best way to achieve the desired result.

Here is what the customer has....
Calls placed to a DID ring two phones (Ext 101, 102)
If the call is unanswered it goes to vm101

To do this I created a hunt group with a Phone Extension list (101, 102) as the only member
Recall is set to send the caller to a CRA, which in turn transfers them directly to vm101
This works fine

Customer has now ask for the ability to have calls ring both phone even when they are in use. 
I don't believe this is possible using a hunt group but maybe I am wrong.
I was thinking of just routing the DID directly to Extension 101 and adding a secondary extension on Ext 102

Anyone have a better idea?

[lowradiation]

To ring both phones even when both are in use:
Create a phantom extension (eg. 201)
Put x201 in the same phone extension list as x101 and x102
Add secondary extension key of x201 to both x101 and x102 and set  'Ring When' to 0
The must have a least 2 Call Keys

[Tech Electronics]

Hershel,

Have you thought about setting up DEE on x101 that rings x102 at the same time?

Thanks,

TE