Author Topic: Shared line appearance across a cluster  (Read 1439 times)

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1214
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Shared line appearance across a cluster
« on: March 10, 2016, 04:54:41 PM »
I though I saw a comment in a thread recently on how to get a non-prime line on a set to ring for a line in another node in the cluster. Can't for the life of me find it now, and I have a need to do that on an MCD 6.0UR3 cluster.

What I mean is, the user at 1234 at site A is temporarily moving to set 5678 at site B. Rather than reprogram phones, or change the user to a HotDesk user, looking for a quick and dirty way to give 1234 a ringing appearance on 5678. I can't figure out how to do that.


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Shared line appearance across a cluster
« Reply #1 on: March 10, 2016, 05:53:19 PM »
Remote ringing BLF/DSS key should work

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1214
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Shared line appearance across a cluster
« Reply #2 on: March 11, 2016, 08:17:24 AM »
Remote ringing BLF/DSS key should work

I tried that, can't get that to work. Got some detail on how to set it up? I tried just setting a DSS/BLF key of the remote DN on the phone, and setting the ring type to "ring". I'm obviously still missing something because that isn't working.

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: Shared line appearance across a cluster
« Reply #3 on: March 11, 2016, 07:10:50 PM »

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1214
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Shared line appearance across a cluster
« Reply #4 on: March 14, 2016, 12:07:16 PM »
Didn't have the programming required in Remote Busy Lamps on the remote node. Got it working, thanks.


 

Sitemap 1 2 3 4 5 6 7 8 9 10