Author Topic: Colt SIP Trunk London help needed  (Read 1966 times)

Offline Hallsey88

  • Contributer
  • *
  • Posts: 11
  • Country: us
  • Karma: +0/-0
    • View Profile
Colt SIP Trunk London help needed
« on: December 31, 2015, 02:45:34 PM »
Colt SIP Trunk London and the Mitel 3300.   Colt is not using user name / password authentication only IP Addy.   Anyone have any luck setting one of these up on the 3300.  Getting 404 error and cannot register to registrar.


Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Colt SIP Trunk London help needed
« Reply #1 on: December 31, 2015, 04:06:51 PM »
Is there a Colt setup config on MoL? I've only ever done username/password authentication, sorry.

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Colt SIP Trunk London help needed
« Reply #2 on: December 31, 2015, 04:19:38 PM »
BTW, COLT should be able to supply the SIP GoE for you if you do not have access to MoL. Basically your IP address is trusted by COLT so you need to make sure no address translation is being used by your network when it gives out your IP address to colt.

Offline Hallsey88

  • Contributer
  • *
  • Posts: 11
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Colt SIP Trunk London help needed
« Reply #3 on: January 06, 2016, 08:15:18 AM »
Thank you both for the response   I have the MOL from Mitel  / Colt.  Set it up item for item.   Just getting a busy when dialing out.   No authentication is set up.   Confusing when you see NOT REGISTERED or  SIP LINK DOWN as they are only using IP ADDY.   I am only used to username  / password configs.   I will double check to see if there is any translation going on from me to COLT.   I have to be getting close    ;D

Offline Hallsey88

  • Contributer
  • *
  • Posts: 11
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Colt SIP Trunk London help needed
« Reply #4 on: January 08, 2016, 01:21:48 PM »
Up and running.   3300 stateside,  Colt SIP plugged in London location.   Works like a charm. 

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Colt SIP Trunk London help needed
« Reply #5 on: January 09, 2016, 04:08:45 PM »
What was the issue?

Offline Hallsey88

  • Contributer
  • *
  • Posts: 11
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Colt SIP Trunk London help needed
« Reply #6 on: January 15, 2016, 05:06:15 PM »
Colt signalling port was having an issue.   We were TX but they no RX.   A quick re config on their side and we were up and running.   


 

Sitemap 1 2 3 4 5 6 7 8 9 10