Hello,
I was trying to setup the embedded voicemail on our 3300 MCD 4.2 controller. I was following the procedure outlined in the 'help' link.
The procedure from the 'help' link says to setup the COS, then define the VM Ports and then build and add the ports to a hunt group.
Following this procedure, I get the following error when adding VM ports to hunt group: Member has one of his COS set as voice mail port.
This has to do w/ the COV/ONS/E&M Voice Mail Port option when defining the COS.
To get around the error, I had to define the VM Ports, build and add the ports to a hunt group - and then define the COS and options.
Not sure if the procedure has missteps. But mainly just wanted to share my troubleshooting experience, in hopes of helping someone else.
Regards,
Mike G.