Author Topic: Help with version 7.1  (Read 1456 times)

Offline rlafata

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +0/-0
    • View Profile
Help with version 7.1
« on: December 08, 2015, 01:33:01 PM »
We just upgraded some of our 3300s to 7.1 and when the phones boot up they are getting message assertion failed-18.  We have determine is is a 802.x issue.  When we remove 802.x from the switch port the phone boots up fine.  Does anyone know a workaround for the 802.x?   Any help would be appreciated.


Offline rlafata

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +0/-0
    • View Profile
Re: Help with version 7.1
« Reply #1 on: December 30, 2015, 11:09:26 AM »
Mitel changed the firmware on version 7.1 for the IP phones.  It does not work with 802.1X.  We are having to upgrade controllers to 7.1 and then putting in old firmware for IP Phones.  Mitel dropped the ball on this BIG TIME!


 

Sitemap 1 2 3 4 5 6 7 8 9 10