« previous next »
Pages: [1]   Go Down

Author Topic: mitel sends early connect signal, need to wait for response from far end  (Read 1434 times)

Offline DialX

  • New Member
  • *
  • Posts: 1
  • Country: us
  • Karma: +0/-0
    • View Profile
mitel sends early connect signal, need to wait for response from far end
« on: October 21, 2015, 02:39:09 PM »
Hello we have a Mitel 3300 SIP trunk group that is giving us an early connect signal. We need to wait for the far end. Is there a setting(s) to ignore the early connect thus allowing the call progression.
Thanks
Steve
Logged

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1215
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: mitel sends early connect signal, need to wait for response from far end
« Reply #1 on: October 21, 2015, 04:22:03 PM »
There's a few SDP options you can mess around with in the SIP Peer Profile form, which one you need to mess with will depend on which RFC the other end works with.
Logged

Offline matthew

  • Full Member
  • ***
  • Posts: 123
  • Country: au
  • Karma: +2/-0
    • View Profile
Re: mitel sends early connect signal, need to wait for response from far end
« Reply #2 on: October 21, 2015, 06:12:49 PM »
Logged

RogerV

  • Guest
Re: mitel sends early connect signal, need to wait for response from far end
« Reply #3 on: October 24, 2015, 02:49:26 PM »
What is your setup? MBG involved or just MCD. Also your bandwidth provider should have a Interlop Spec sheet. and if i may ask who is your Sip trunk provider?
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10