Author Topic: call flows in Nupoint  (Read 1527 times)

Offline EZEK

  • Contributer
  • *
  • Posts: 20
  • Country: ca
  • Karma: +0/-0
    • View Profile
call flows in Nupoint
« on: May 22, 2015, 09:09:31 AM »
Hi , I start work with the Nupoints and I don't have much experience .I need help in the following .
I need to create a new message for the auto attendant for my client , what I did is.
1- I create a mail box 7053 and then go to the call flows and create the flows which the client want . as I know this new configuration are Offline and I did activate for the MAS by rebooting .

My problem is that the MCD not see this Mailbox and because of that I can't make any routing for this call flows.

What is the missing part in the configuration ?

Thanks in advance 


Offline idxman01

  • Jr. Member
  • **
  • Posts: 33
  • Country: us
  • Karma: +1/-0
    • View Profile
Re: call flows in Nupoint
« Reply #1 on: October 18, 2015, 09:13:51 PM »
Add mailbox # as a single line, no ring, key on a phantom ext.  then go to call rerouting and change always to the vm id. (2?)


 

Sitemap 1 2 3 4 5 6 7 8 9 10