Page

[Rodney]

Can I program a page button for station to station (ext to ext). Not a zone (page zone all phones)

[dwayneg]

Sure you could.  But have you considered just using the hands-free answer feature? If a station is programmed as hands-free (station flag) and another station calls it will beep and then you have a 2-way intercom call.  Be sure calling station does NOT have RING INTERCOM ALWAYS turned on, that over-rides HANDS FREE.  Maybe by combining these two flags on sending and receiving stations you can get what you need.  By the way, pressing # before dial;ing or pressing ext button over-rides HANDS FREE for one call only. And you can turn both features on and off with feature codes.

[Rodney]

 Thank you for the reply.

    I turned on that feature(handsfree) only thing I don't like when a incoming call comes in ext  221 answers it and tranfers to 222 it opens up the line on the speaker. Person at ext 222 better be careful what they say...

[dwayneg]

It shouldn't open up voice to the outside call, just the IC to transferring party. Once transferring party hangs up the receiving party will still need to answer the outside call as a separate action.