Author Topic: 2 extensions to 1 embedded voicemail box on 3300 7.1?  (Read 3447 times)

Offline BlackSunshine

  • Full Member
  • ***
  • Posts: 190
  • Country: us
  • Karma: +1/-0
    • View Profile
2 extensions to 1 embedded voicemail box on 3300 7.1?
« on: June 26, 2015, 06:18:49 PM »
Is there a way to have 2 extensions go to one voicemail box on 3300 embedded voicemail? Thanks in advance


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: 2 extensions to 1 embedded voicemail box on 3300 7.1?
« Reply #1 on: June 26, 2015, 09:15:57 PM »
yes

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: 2 extensions to 1 embedded voicemail box on 3300 7.1?
« Reply #2 on: June 27, 2015, 09:07:58 AM »
Here's one way.
If your mailbox is 5555 create an ACD path of *5555.
It must be set up for calls to queue to it for 1 second.
Then interflow to VM.
Then forward any phones you want to go into the 5555 mailbox to forward to the ACD path.

I believe there are a couple of other ways also but I've used this way a couple of times.

Ralph

Offline show212

  • Contributer
  • *
  • Posts: 5
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: 2 extensions to 1 embedded voicemail box on 3300 7.1?
« Reply #3 on: October 18, 2016, 05:26:24 PM »
Sorry for bump of this old thread, but I am trying what you suggested above.

I have a ring group overflowing to an ACD Path, named the same as the VM box I'm trying to go to *XXXXX. After no answer of the Ring group it is transferred to the ACD path but instead of hitting the VM Box it hits the Auto Attendant. Any ideas?

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: 2 extensions to 1 embedded voicemail box on 3300 7.1?
« Reply #4 on: October 19, 2016, 07:47:17 AM »
Be sure the call ques to the ACD path for at least 1 second.
Then your mailbox must match the extension number of the ACD path.

Ralph

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: 2 extensions to 1 embedded voicemail box on 3300 7.1?
« Reply #5 on: October 19, 2016, 05:10:04 PM »
Shake the devil

Offline show212

  • Contributer
  • *
  • Posts: 5
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: 2 extensions to 1 embedded voicemail box on 3300 7.1?
« Reply #6 on: October 20, 2016, 02:48:59 PM »
I found another way to do this, which is actually longer but worth noting.
Ring Group Overflow to ACD Path - ACD Path Overflow to Nametag Hunt Group after .01 Seconds - Nametag Hunt Group set as Extension in VM box settings - Reroute Hunt Group 2/2/2/1/1

Ralph yours is obviously the shorter route, but both will work!

Thanks for the help!


 

Sitemap 1 2 3 4 5 6 7 8 9 10