Author Topic: Intel 8622 Gateway IP  (Read 1713 times)

Offline cgashlin01

  • Jr. Member
  • **
  • Posts: 67
  • Country: us
  • Karma: +0/-0
    • View Profile
Intel 8622 Gateway IP
« on: June 08, 2015, 11:18:17 AM »
How to manually enter Gateway IP for remonte phones?


Intel 8622

Cant figure it out.


Offline dwayneg

  • Hero Member
  • *****
  • Posts: 612
  • Country: us
  • Karma: +29/-1
    • View Profile
Re: Intel 8622 Gateway IP
« Reply #1 on: June 08, 2015, 02:11:39 PM »
Plug in phone while holding 7 and 8 down.  Choose PROGRAM DATABASE.  Follow the menus on screen.  Also the 6 programmable buttons at the bottom right of the phone take on special context-sensitive functions such as forward and back.  Play with them and you'll figure it out.

Offline cgashlin01

  • Jr. Member
  • **
  • Posts: 67
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Intel 8622 Gateway IP
« Reply #2 on: June 08, 2015, 03:06:09 PM »
That is just asking me to configure static ip.

I want to put in the ip address of my phone system.


Is there a manual that shows what keys do what from this point?

Offline dwayneg

  • Hero Member
  • *****
  • Posts: 612
  • Country: us
  • Karma: +29/-1
    • View Profile
Re: Intel 8622 Gateway IP
« Reply #3 on: June 08, 2015, 04:09:22 PM »
Remember I wrote that the bottom 6 programmable keys were magic?  Use the right key to scroll forward through each of the parameters, left for back, and change as needed.  The second key up on the left will cancel the parameter you're working on, should you make a mistake.  The phone system is called REMOTE IPC IP.  Eventually you'll scroll to where it asks if you want to save.  It's been so long since I've used one I had to plug it in to see what options were offered!


 

Sitemap 1 2 3 4 5 6 7 8 9 10