Mitel Forums > Mitel MiVoice Business/MCD/3300
How to Block Incoming Calls Based on Caller ID - Mitel 3300
artieouellette:
Are you using sip trunks or PRI? There are a few ways this can be done easily
Sent from my iPhone using Tapatalk
pmhaynes:
--- Quote from: pmhaynes on January 31, 2018, 04:05:03 AM ---Here is how to do this if you have an MBG and SIP trunks
http://phonesystemhelp.info/blog/2018/01/17/how-to-block-incoming-calls-on-mbg-using-sip/
--- End quote ---
new URL https://phonesystemhelp.info/how-to-block-incoming-calls-on-mbg-using-sip/
Cableguy69:
Sorry to jump on an old thread. I am new here and looking for help integrating the Securelogix product mentioned by PC77375 with the MiVoice Business. The device is positioned between the MiVB and the MBG where the SIP Trunk terminates.
We are able to get inbound traffic routed through the ETM by creating it as an ICP in the MBG but having issues routing outbound traffic from the MiVB to the MBG proxying through the ETM. Of course SecureLogix has no interop or integration guide nor does Mitel. I would love to see the configuration on the ones mentioned at 4 locations in Houston.
abmitel:
Hi
please re attach the document for version below v9
Navigation
[0] Message Index
[*] Previous page
Go to full version