Mitel Forums > Mitel MiVoice Business/MCD/3300
How to Block Incoming Calls Based on Caller ID - Mitel 3300
Ronan:
I was at Mitel's French offices the other day and got confirmation that V9 will finally give us this option.
Too bad we'll not be able to use it right away as we would need to replace some hardware that will not be compatible with this version.
ralph:
I stumbled across my original doc on how to do this.
I've made it available here
Ralph
martyn:
FYI - with MiVB 9 this is native to the system and can be configured through caller based routing.
Ronan:
--- Quote from: pmhaynes on January 31, 2018, 04:05:03 AM ---Here is how to do this if you have an MBG and SIP trunks
http://phonesystemhelp.info/blog/2018/01/17/how-to-block-incoming-calls-on-mbg-using-sip/
--- End quote ---
The link doesn't work. If someone has an alternative.
ralph:
Did you try this link?
--- Quote from: ralph on August 03, 2018, 10:33:32 PM ---I stumbled across my original doc on how to do this.
I've made it available here
Ralph
--- End quote ---
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version