« previous next »
Pages: [1]   Go Down

Author Topic: Configure Bandwidth.com 911 testing number 933  (Read 2032 times)

RogerV

  • Guest
Configure Bandwidth.com 911 testing number 933
« on: May 19, 2015, 02:56:15 PM »
I have bandwidth.com as a sip trunk provider, and they have a number to call and test with (933). but i get invalid.
Does anyone know how to configure this?

Please Help
Logged

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Configure Bandwidth.com 911 testing number 933
« Reply #1 on: May 19, 2015, 03:12:44 PM »
You need to put a specific entry in ARS for the number. if you dial 9 then put in 9933 strip off the first digit and route it to the SIP trunk group. Other wise justy put 933 in as number as normal. Both no digits to follow.
Logged

RogerV

  • Guest
Re: Configure Bandwidth.com 911 testing number 933
« Reply #2 on: May 19, 2015, 03:14:41 PM »
yes i did that and i get invalid.
Logged

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Configure Bandwidth.com 911 testing number 933
« Reply #3 on: May 19, 2015, 04:00:23 PM »
Are you absorbing the '9' when sending the call out on the trunk?

Ralph
Logged

RogerV

  • Guest
Re: Configure Bandwidth.com 911 testing number 933
« Reply #4 on: May 21, 2015, 03:42:07 PM »
Thanks guys, I got it fixed. I had to add two more network elements, Sip peer profiles and add the ARS Routes and digits dialed.
Then i had to add the trunks in the MBG for this to work. Now working all good..
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10