Author Topic: Call Duration Display on QSIG T1  (Read 1536 times)

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1215
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Call Duration Display on QSIG T1
« on: March 05, 2015, 12:22:25 PM »
Running MCD 6.0UR3. I have 2 PRI's to AT&T and 2 QSIG links to an Avaya CM/Aura environment. Call Duration Display works fine on calls involving the PRI trunks, but does not display on calls over the QSIG links. What setting am I missing? COS settings are identical.


Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Call Duration Display on QSIG T1
« Reply #1 on: March 05, 2015, 01:36:21 PM »
I believe this is working as designed as the PRI's are classed as public and the Qsig is classed as private (internal) and you don't get a call timer on internal calls. I have a vauge feeling that there is a setting somewhere to make qsig calls public but its only a very vauge recollection. I have the same problem on SIP trunks which are treated as private rather than public....


 

Sitemap 1 2 3 4 5 6 7 8 9 10