Author Topic: CSM Intelligent Router  (Read 2187 times)

Offline darrel

  • Contributer
  • *
  • Posts: 20
  • Country: us
  • Karma: +0/-0
    • View Profile
CSM Intelligent Router
« on: March 02, 2015, 01:36:44 AM »
Has anyone setup 6.01 CSM Intelligent Router on a 5000. I'm missing something reading the manual, can't find programing on how to route traffic to/through the CSM server. Have the system in sync so I know OAI is up.


Offline 619Tech

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 230
  • Country: us
  • Karma: +1/-0
    • View Profile
Re: CSM Intelligent Router
« Reply #1 on: March 02, 2015, 03:50:23 PM »
Your IR rules are triggered by criteria. Once that criteria is matched it implements commands via the OAI stream. For example, if you want to hang-up on a certain inbound problem caller (ANI), you wouldn’t route calls any different. The IR would detect the Caller ID in the OAI stream, see that it matches a rule criteria, and implement the programmed action for that rule via the stream. Montitors/Actions of ACD/HG/Agents is the same, no routing through the IR, it’s all just monitored by IR looking for a rules criteria match.

Offline darrel

  • Contributer
  • *
  • Posts: 20
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: CSM Intelligent Router
« Reply #2 on: March 04, 2015, 01:07:22 PM »
Thanks
Was able to setup a route. I've added more routes to test. Odd thing is you have to flag the Condition as Text to pick up the Caller ID for routing

Thanks again

Offline 619Tech

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 230
  • Country: us
  • Karma: +1/-0
    • View Profile
Re: CSM Intelligent Router
« Reply #3 on: March 09, 2015, 11:55:54 AM »
Correct, your type of comparison in the Condition needs to be Text instead of Numeric, like you would think.


 

Sitemap 1 2 3 4 5 6 7 8 9 10