« previous next »
Pages: [1]   Go Down

Author Topic: Adjust Impedance on loop start line  (Read 1575 times)

RogerV

  • Guest
Adjust Impedance on loop start line
« on: January 15, 2015, 11:58:13 AM »
Is there a way to adjust the impendance on Loop Start trunks.
There is an echo on the lines

Using a Cxi Controller load 8.0
Logged

RogerV

  • Guest
Re: Adjust Impedance on loop start line
« Reply #1 on: January 29, 2015, 09:16:56 AM »
Got it Resolved ..
Logged

Offline KChan

  • Contributer
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
Re: Adjust Impedance on loop start line
« Reply #2 on: February 05, 2015, 02:14:45 AM »
How to resolve it, and what's causing the problem?
Logged

RogerV

  • Guest
Re: Adjust Impedance on loop start line
« Reply #3 on: February 05, 2015, 03:33:07 AM »
What using xo communication for pots lines and the network balance was set to 600. Customer then changed to atnt pots lines. With atnt lines network balance needs to be set to national complex and also enable class trunks option. Echo goes away and everyone happy.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10