Author Topic: Mitel Call Center Monitor/real time pro  (Read 1842 times)

Offline cholzhauer

  • Full Member
  • ***
  • Posts: 194
  • Country: us
  • Karma: +1/-0
    • View Profile
Mitel Call Center Monitor/real time pro
« on: January 07, 2015, 03:22:18 PM »
Does anyone have any experience with this?  I have a manager who's trying to use the silent monitor feature of Real Time Pro and getting the attached error.  We've used this feature with previous managers, so I'm thinking it must be a setup issue.


Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2983
  • Country: us
  • Karma: +89/-1
    • View Profile
Re: Mitel Call Center Monitor/real time pro
« Reply #1 on: January 08, 2015, 12:04:54 PM »
Cholzhauer,

The extension trying to monitor has to be a supervisor of the hunt group that has ext 1787 in it or they will not be able to monitor their calls.

Thanks,

TE

Offline cholzhauer

  • Full Member
  • ***
  • Posts: 194
  • Country: us
  • Karma: +1/-0
    • View Profile
Re: Mitel Call Center Monitor/real time pro
« Reply #2 on: January 08, 2015, 01:12:57 PM »
That'll do it.  What if the person trying to do the monitoring isn't on the same phone system?  Do I have to do something with phantoms then?

Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2983
  • Country: us
  • Karma: +89/-1
    • View Profile
Re: Mitel Call Center Monitor/real time pro
« Reply #3 on: January 08, 2015, 03:43:25 PM »
Cholzhauer,

Don't think that is possible with an Axxess. I would need to look that up to be sure though.

Thanks,

TE

Offline 619Tech

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 230
  • Country: us
  • Karma: +1/-0
    • View Profile
Re: Mitel Call Center Monitor/real time pro
« Reply #4 on: January 09, 2015, 03:14:57 PM »
Supervisors must reside on the same Node as the members they are monitoring. If the endpoints are IP, I believe they need to be in the same network groups as well.


 

Sitemap 1 2 3 4 5 6 7 8 9 10