« previous next »
Pages: [1]   Go Down

Author Topic: 5448 PKM on 5340 SX200ICP  (Read 2567 times)

Offline tlmagnus

  • Jr. Member
  • **
  • Posts: 33
  • Country: us
  • Karma: +1/-0
    • View Profile
5448 PKM on 5340 SX200ICP
« on: December 29, 2014, 05:11:43 PM »
Just tried installing a 5448 PKM on a 5340.  Customer has a SX200ICP MX.  For some reason, the PKM just flashes all the lights orange and in form 9 it does not give me the option to open the PKM.  Tried reseating the interface module (it's a version 2, so has the little power cable that goes in there).  Still no luck.  Any ideas?
Logged

Offline fifty5footer

  • Contributer
  • *
  • Posts: 11
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: 5448 PKM on 5340 SX200ICP
« Reply #1 on: December 30, 2014, 01:07:54 PM »
5340's do not support pkm's, on a 200 ICP
Logged

Offline tlmagnus

  • Jr. Member
  • **
  • Posts: 33
  • Country: us
  • Karma: +1/-0
    • View Profile
Re: 5448 PKM on 5340 SX200ICP
« Reply #2 on: December 30, 2014, 02:52:14 PM »
So Mitel lists the 5340 as not supporting the PKM, but does not indicate the 5340e as not supported, does anyone know if this is the case or if both do not support the PKM?
Logged

Offline marcolive

  • Full Member
  • ***
  • Posts: 131
  • Karma: +2/-0
    • View Profile
Re: 5448 PKM on 5340 SX200ICP
« Reply #3 on: January 01, 2015, 01:59:54 AM »
I'm pretty sure both doesn't support PKM.
Logged

Offline fifty5footer

  • Contributer
  • *
  • Posts: 11
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: 5448 PKM on 5340 SX200ICP
« Reply #4 on: January 01, 2015, 01:40:11 PM »
Neither of them support the PKM.
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10