Hi Everyone,
I was able to program the E2T card on the main controller (MXeIII rel 6 SP2) but can't do it on the resilient controller. I keep on getting "Can't load boot file!!"
I've reseated the card, rebooted the MCD.
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel MMC-C PPC83XX F2500
Version: VxWorks5.5.2
BSP version: 3.1/11
Creation date: Aug 10 2012, 10:47:30
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...
boot device : qefcc
unit number : 0
processor number : 0
host name : bootHost
file name : /sysro/E2T8260
inet on ethernet (e) : <IP:Mask of E2T>
host inet (h) : <IP of MCD>
gateway inet (g) : <IP gateway programmed on the MCD>
user (u) : ftp
ftp password (pw) : @
flags (f) : 0x0 --> DHCP disabled
other (o) : qefcc
Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading...
Host <IP of E2T card> is not responding
Error loading file: errno = 0x3d0001.
Getting boot parameters via tftp from 192.168.1.2:slot1.cfg.
192.168.1.2:slot1.cfg: tftp transfer failed: errno 0x4b0007
Getting boot parameters via tftp from 192.168.1.8:slot1.cfg.
192.168.1.8:slot1.cfg: tftp transfer failed: errno 0x4b0007
Can't load boot file!!
