Firmware version 3 for Mitel 5224 IP Phone

[tifoski]

Hello,

I need to update the firmware on my Mitel IP Phone 5224, which is 2.0 currently. My MCD is at version 6 and thus not updated directly. Need firmware version 3.0 so after that I can update the IP Phone directly by MCD. Can anyone help me? I need the BOOTIP and L2BOOT. Thanks

Best regards,

Lucas Tifoski

[lundah]

The built-in TFTP server on MCD6 still includes the required boot files for a 5224.

[tifoski]

Yes, but the 5224 can not upgrade directly from version 2 to 6. It must be version 3 or higher to update directly. As the 5224 is version 2, i need to update locally to version 3, and after that connect the MCD and upgrade directly. Can help me with version 3?

Thanks,

Lucas Tifoski

[bluewhite4]

Are you talking about SIP firmwares? Because otherwise the answer from lundah would be correct.

[tifoski]

I'm talking about BOOTIP and L2BOOT. For if my IP Phone was with version 3 of both, I could directly upgrade to the current version by MCD. However, as it is in version 2, it does not directly updated by the MCD. Would need to upgrade locally by a machine with a TFTP server and after that connect the IP Phone to the MCD to upgrade to the current version. Of 2 for the current not updated, only from the third.

Thanks,

Lucas Tifoski

[sarond]

Do you have access to MOL?
You could try and download an old version of 3300 software, maybe release 6 and then extract the IP Phone FW.