« previous next »
Pages: [1]   Go Down

Author Topic: v6.0 Mitel 5000/ MiVoice Office/ MiVoice Office 250 PS-1  (Read 2177 times)

Offline jmarcwsp1

  • Full Member
  • ***
  • Posts: 144
  • Country: us
  • Karma: +0/-1
    • View Profile
v6.0 Mitel 5000/ MiVoice Office/ MiVoice Office 250 PS-1
« on: November 10, 2014, 08:04:58 AM »
Our client recently added a PS-1.  It is my understanding that the PS-1 replaces the need for the 2G Flash.  When the customer powers down the system and removes the flash the system goes into preboot mode.  As soon as they put the Flash back in the system comes back up.  Any thoughts?
Logged

Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2983
  • Country: us
  • Karma: +89/-1
    • View Profile
Re: v6.0 Mitel 5000/ MiVoice Office/ MiVoice Office 250 PS-1
« Reply #1 on: November 10, 2014, 09:06:59 AM »
Jmarcwsp1,

I am not sure where you got that information, but it is inaccurate. The confusion may come in that the licensing is attached to the PS-1 dongle and not the CF card. The base unit uses the CF as a hard drive so it won't work without it.

Thanks,

TE
« Last Edit: November 10, 2014, 09:54:39 AM by Tech Electronics »
Logged

Offline jmarcwsp1

  • Full Member
  • ***
  • Posts: 144
  • Country: us
  • Karma: +0/-1
    • View Profile
Re: v6.0 Mitel 5000/ MiVoice Office/ MiVoice Office 250 PS-1
« Reply #2 on: November 10, 2014, 09:22:05 AM »
Mitel is requesting the Flash card back.
Logged

Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2983
  • Country: us
  • Karma: +89/-1
    • View Profile
Re: v6.0 Mitel 5000/ MiVoice Office/ MiVoice Office 250 PS-1
« Reply #3 on: November 10, 2014, 09:53:59 AM »
Jmarcwsp1,

Yes they will on an upgrade which is why they would need another CF for their system. I made the assumption that you had already swapped that out.

Sorry,

TE
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10