Author Topic: Analog to IP (SPA122)  (Read 1989 times)

Offline jscottbradford

  • New Member
  • *
  • Posts: 1
  • Country: ca
  • Karma: +0/-0
    • View Profile
Analog to IP (SPA122)
« on: November 10, 2014, 03:03:04 PM »
I have a MITEL 3300 through a WAN to several remote sites. Works great for IP phones but I want to put Analog phones at these sites and use the IP WAN back to our central 3300.  I was looking at devices such as the Cisco SPA122... has anyone done this though their LAN rather than through a broadband connection which is what these seem to be designed for.

confirmation accepted but setup/configuration info would be even better!

Thanks.


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Analog to IP (SPA122)
« Reply #1 on: November 10, 2014, 03:48:31 PM »
You should be able to connect the wan port to the lan at the remote locations. As long as the lan ip doesn't conflict it should work fine. I don't think you will have anything besides the phone(s) connected to the ata anyway.


 

Sitemap 1 2 3 4 5 6 7 8 9 10