Author Topic: Show the calling ID and name  (Read 1472 times)

Offline EZEK

  • Contributer
  • *
  • Posts: 20
  • Country: ca
  • Karma: +0/-0
    • View Profile
Show the calling ID and name
« on: November 12, 2014, 07:09:10 PM »
How I make any extension in the 3300 when make an outside call  they can see his name and his company number.


Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Show the calling ID and name
« Reply #1 on: November 13, 2014, 05:04:11 AM »
Don't think you can do the name bit (I'm UK) but if you want to display his DID number rather than the main number of the company then you need to use either associated directory number with CPN type or use the full CPN Subsitution forms if you have a lot of numbers to do. CPN is quick and easy for one user if you software level supports it. Both require the digits delivered by your supplier entered to work.

Offline mszodiac

  • Sr. Member
  • ****
  • Posts: 232
  • Country: ca
  • Karma: +7/-0
    • View Profile
Re: Show the calling ID and name
« Reply #2 on: December 03, 2014, 02:27:54 PM »
We have an MxeIII running 6.0 SP2.  When I make an external call, my name and number is displayed.

Do you have these enabled on the IP set's COS?

Display ANI/ISDN Calling Number Only: Yes
Display Dialed Digits during Outgoing Calls: Yes
Display DNIs/Called Number Before Digit Modification: Yes
Non-Prime Public Network Identity: Yes


 

Sitemap 1 2 3 4 5 6 7 8 9 10