Night Mode Toggle

[irongladiator]

Hi all,
I know the Mitel 3300 is capable of 3 modes (Day, Night 1 & Night 2)
I have three questions pertaining Night Modes:
1) Does the "Night Mode Toggle Button" light up if on and off if not on?
2) Can you tenant out the night mode so if you have more than one site on the same MCD they can all have their own night modes?
3) How can you tell if it is in Night 1 or Night 2? (Are their two different LED colors if it does display that is - or is it indicated on the display?)

Thanks,
-Iron

[x-man]

There is a button you can programme to light up for night service in later software I believe.

Don't know about tenanting, sorry

You can dial a night mode feature( or put it under a key) to show what mode it is in.Dialed night mode inquire.

[markyb73]

Hi,

Yes you can tenant the night mode to different devices, only tenant zone 1 can be scheduled though.
I have used it when we have had multiple offices hanging off 1 MCD and all want different day/night times.

[irongladiator]

Hi,

Yes you can tenant the night mode to different devices, only tenant zone 1 can be scheduled though.
I have used it when we have had multiple offices hanging off 1 MCD and all want different day/night times.

markyb73,
That's good to know you can do that, and that there is a limitation on "Automatic Switching" for only "Zone 1".

Thanks,
-Iron