« previous next »
Pages: [1]   Go Down

Author Topic: Generic SIP MWI  (Read 2191 times)

Offline 619Tech

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 230
  • Country: us
  • Karma: +1/-0
    • View Profile
Generic SIP MWI
« on: November 05, 2014, 07:52:59 PM »
MXe 13.0.1.28
My first Generic SIP device endpoint install. Anyone able to light msg button for VM msgs? I have embedded VM w/Linksys SPA942 endpoints. Trying via *33 & #33 dialed from 53xx. Creating a MWI button on SPA942 in DB didn't help. Put MWI button for SIP DN on 53xx and it does light, but I need the SPA942 to light somehow.
Logged

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: Generic SIP MWI
« Reply #1 on: November 06, 2014, 03:53:03 AM »
Check the 'SIP Device Capabilities' form that the phones belong to. MWI is not enabled by default I believe.
Logged

Offline 619Tech

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 230
  • Country: us
  • Karma: +1/-0
    • View Profile
Re: Generic SIP MWI
« Reply #2 on: November 06, 2014, 11:38:12 AM »
The only MWI option I see is "Allow MWI Notification without Subscription", which I changed to yes. Still no MWI using #33. I then called the SIP DN (x1010) from a 53xx and pressed the msg envelope button which lights the MWI 1010 key on x1001 (5330) and the SPA942. Now I can't make it turn off. Even the MWI 1010 key on x1001 stays lit when I dial #331010.
Logged

Offline 619Tech

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 230
  • Country: us
  • Karma: +1/-0
    • View Profile
Re: Generic SIP MWI
« Reply #3 on: November 06, 2014, 02:13:16 PM »
update: after initiating a return call from the MWI 1010 button and answering it, the MWI light on x1010 went out. Then I retested, and now the MWI codes are working!!
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10