PRI outgoing number delivery

[tlmagnus]

Hi,
Having some trouble with a carrier on number delivery for a PRI.  The customer switched carriers, and formerly the number delivery was working correctly to AT&T cell phones.  Now however the display just shows "unknown" when receiving a call from the customer.  The new carrier says that AT&T requires four fields to be correct when calls go out; Nature of address, number plan, address presentation, and screening indicator.  I have not seen any of these fields on an ICP.  However, the carrier is using an Adtran on site to provide the PRI.  Should these settings be found in there?
Thanks!

[tlmagnus]

So the carrier sent over their debug log.  They said that the CDN_TON and CDN_NPI should not show unknown.  Anybody know where this is supplied from?  I thought that this was part of the NI2 standard.

Message Type : SCP_X_LONG Originate MSG
    Progress Indicator: NIL_VALUE
    Prog_Ind Location : NIL_VALUE
                                        BC_NAME : SPEECH
    CDN_Digits : (edited out for posting)
    CDN_TON    : UNKNOWN                CDN_NPI : UNKNOWN
    CGN_Digits : 7017878602
    CGN_TON    : UNKNOWN                CGN_NPI : UNKNOWN
    CGN_SI  : NETWORK_PROVIDED          CGN_PI  : PRESENTATION_ALLOWED
    NI-PRI CGN_SI_PI : SI_NETWORK_AND_PI_ALLOWED
    DIGITS  : 
    LAST DIGITS MSG  : YES
    LTID   :ISDN  115
    BDN_Digits : 7017878500
    SSD OPTIONAL PARM
      LENGTH: 10
      DATA: 01 08 00 20 0F CD 00 0A 0C 00
         SUBPARM ID  : 1 - peer sig info
         SUBPARM VER : 0
         SUBPARM LEN : 8
            SUBPARM DATA: 00 20 0F CD 00 0A 0C 00
 
OUTGOING  10:27:04.454  NODE TYPE= GWC_NODE 
DS512: ENCAP MS_CARD= 253 MS_PORT= 125  NODE= -515
NN= 0020  TN= 0FCC  MSGTAG= 00  ROUTE= FDFD  ERROR= 00  LENGTH= 0E 
AGENT= CKT         GFCOUNTY   23
81 42 00 2D 1A 39