Author Topic: Phone / Voice mail / Menu node routing question  (Read 1590 times)

Offline SUSD

  • Full Member
  • ***
  • Posts: 128
  • Country: us
  • Karma: +0/-1
    • View Profile
Phone / Voice mail / Menu node routing question
« on: September 18, 2014, 02:25:10 PM »
3300 MXe 2-Clustered Rel 4.2 / 10.2.0.26_2  EMB-VM 6-SX200 10-ASU  PRIs

We have a Help Desk # 6500 that rings a hunt group. If no answer, call goes to voice mail box.  This is where my pea brain is getting lost.

I want for Mon - Fri 5PM to 6AM and continue thru the weekend, the 6500 instead of hitting the hunt group, it hits a Menu node, so it can call 2 possible On Call phones.

I'm clueless what options I have for this, any suggestions are greatly appreciated.



Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Phone / Voice mail / Menu node routing question
« Reply #1 on: September 18, 2014, 03:04:09 PM »
Only way to do this is via changes in the Day/night1/Night2 modes.
That and a bit of PFM.
You'd have to put the system in Day mode for your normal ringing then in Night 1 mode point it to a phantom ACD group, queue it for 1 second, then interflow it to VM.  The menu node maibox will be the number of the ACD group.

Ralph.

Offline SUSD

  • Full Member
  • ***
  • Posts: 128
  • Country: us
  • Karma: +0/-1
    • View Profile
Re: Phone / Voice mail / Menu node routing question
« Reply #2 on: September 18, 2014, 07:08:00 PM »
Ralph,

I just had a thought, pretty scary......... What if we Call Forward the Help Desk number to the Menu Node at the end of the day ?

Forget the scheduling, of course they have to Cancel Call Forward in the mornings

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Phone / Voice mail / Menu node routing question
« Reply #3 on: September 19, 2014, 08:47:55 AM »
You can use third party remote call forwarding.   That may work for you.
Put a couple of speed dials on the phones that need it.  One for on and one for off.

Ralph


 

Sitemap 1 2 3 4 5 6 7 8 9 10