results of bootChange:
Boot device : ata=0
processor number: 0
host name:
file name: /partition4/RTC8260
inet on ethernet (e): 192.168.1.20:fffffc00
inet on backplane (b):
host inet (h): 192.168.3.252
gateway inet (g): 192.168.1.1
user (u): IUSR
ftp password:
flags (f): 0x0
target name (tn):
startup script:
other: qefcc
Which matches what it should be. MCD should be at .20
FYI - Had the tech show me on other MCD what exactly he did. It's shockingly easy to do. Go to
LAN/WAN configuration. Click on Layer 2 Switch. In the right side bottom window will be a split area, which is labled "L2 ports". There are two listed of course for your 2 10/100 ports. Click on button "change member" which will open a new window and have Port 1 selected. There are different options listed such as "State" (enabled/disabled) "speed" (auto) "duplex mode" (auto), "flow control" (auto), and the most important one "voice vlan" (untagged/tagged/no). Instead of changing tagged to untagged, he clicked on "disabled" option for State.