Meet me page on Mitel Mivoice office

[Vicbob]

Does anybody have a way to do this, On this system?

Thanks!

Vicbob

[Hovus]

Please explain in some kind of detail what you're trying to accomplish.

[Tech Electronics]

VicBob,

Can we assume you are referring to Meet-Me-Conferencing? If that is the case then just create the application by going to System>Devices and Features>Assistants then right-click on the application side and select the Meet-me-conferencing assistant.

If you have not done it yet you will also want to change the conferencing type from basic to advanced to allow for more conferencing circuits.

Also, by default the users extension is their conferencing access code, but they can set up others.

Thanks,

TE

[acejavelin]

I think what he is referring to by Meet Me Paging, a feature some phone systems have, is you make a page and the person can dial a code and callback or "meet you" without having to dial your extension. The 5000 does not support this.

[Tech Electronics]

Acejavelin,

Technically, there is a knowledge-base article on how to emulate that feature which has been around since the Axxess days. I will find it again and let you know the KB article #. I believe it is set up similar to the way we do call parking with a Hunt Group and a Phantom Port on the 5000.

Thanks,

TE

[Tech Electronics]

Acejavelin,

Here is the KB article on that and it is what I was thinking about as a Call Park function and you have the person call it and then your reverse-transfer it to the phone you are at or have a button on your phone that shows when they get there and then do a reverse transfer feature and press that button.

How to Create a Park Zone with Lamp Status or Meet Me Calling

Published 02/27/2003 02:49 PM   |    Updated 12/12/2013 10:59 AM   |    Answer ID 1082



Thanks,

TE

[Vicbob]

Thank you!
Vicbob.

[acejavelin]

Acejavelin,

Here is the KB article on that and it is what I was thinking about as a Call Park function and you have the person call it and then your reverse-transfer it to the phone you are at or have a button on your phone that shows when they get there and then do a reverse transfer feature and press that button.

How to Create a Park Zone with Lamp Status or Meet Me Calling

Published 02/27/2003 02:49 PM   |    Updated 12/12/2013 10:59 AM   |    Answer ID 1082



Thanks,

TE

Nice... I stand corrected.