3300 MXe 2-Clustered Rel 4.2 / 10.2.0.26_2 EMB-VM 6-SX200 10-ASU
I have a department that is moving out of the facility. They were on a DID group, but now they will have local CO lines.
(I know, put them on IP phones, but that's not happening here for a while yet.)
My thought was to change the voicemail of the DID to menu node and route to a speed dial of the local CO number. I'm trying to program a test setup first, but it's not working. So here's my steps.
I have an extension with voicemail (menu node) Created the message "There is a new number, Please make a note, to transfer now, press 2.
Call route this extension to voicemail always. The message plays when extension is dialed.
Now, Auto Attend wants an "extension" to send to when 2 is pressed, not a speed dial. So I made a phantom extension.
But the Auto Attend won't accept the phantom extension ?
The phantom extension was going to route to the speed dial number and I would be good.
Also, am I doing this the hard way, not sure how I could do it any easier?