Author Topic: UCA 6.0 - SXERR_FEATURE_NOT_ALLOWED  (Read 3691 times)

Offline jake22

  • Contributer
  • *
  • Posts: 5
  • Country: gb
  • Karma: +0/-0
    • View Profile
UCA 6.0 - SXERR_FEATURE_NOT_ALLOWED
« on: March 31, 2014, 08:38:22 PM »
Hello,

I have program a UC Endpoint softphone. When I try to dial out, it says unable to dial out and in the event viewer,  it shows "SXERR_FEATURE_NOT_ALLOWED"
 
MiTAI/Tapi Computer Integration is enable.
Group Presence Control, Group Presence Third Party Control, HCI/CTI/TAPI Call Control Allowed, HCI/CTI/TAPI Monitor Allowed is set to yes and Voice Mail Softkey Allowed is set to no.

Any Idea?

Thanks


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: UCA 6.0 - SXERR_FEATURE_NOT_ALLOWED
« Reply #1 on: April 01, 2014, 10:11:56 AM »
Hello,

I have program a UC Endpoint softphone. When I try to dial out, it says unable to dial out and in the event viewer,  it shows "SXERR_FEATURE_NOT_ALLOWED"
 
MiTAI/Tapi Computer Integration is enable.
Group Presence Control, Group Presence Third Party Control, HCI/CTI/TAPI Call Control Allowed, HCI/CTI/TAPI Monitor Allowed is set to yes and Voice Mail Softkey Allowed is set to no.

Any Idea?

Thanks
MCD 5.0 SP2 or higher, or 5000 v5.1, is required for UCA Softphone.

It is a SIP softphone, did you go through the step-by-step guide in the UCA Admin guide for the MCD/5000 and the endpoint? There is more that needs to be done in SIP settings and stuff.



 

Sitemap 1 2 3 4 5 6 7 8 9 10