Multi-Device Suites Records ISSUE !

[Fouadae]

Hello Everyone

This is my first POST and I am happy entering Mitel field.
I have a problem with Multi-Device Suites I was adding records there until I reached a certain number around 355 records and next it gave me there is no more room for new records, I'v checked the license and only 364 was locally consumed out of 1000 allocated.

I was thinking maybe size needs to be expanded somehow ! still assumption
here is some pics to clarify the situation






Thanks in advanced for your support 

Regards

[martyn]

What platform and base pack is the system running on?

By the looks of it you have hit the upper limit of the system capabilities. I haven't had a coffee yet this morning after a long weekend, but that number looks suspiciously like it is the limit of a CX(i) or a base pack limitation.

[Fouadae]

Thanks for your reply
it is MXe 3300, I am using ISS, I used MSL and MCD 6.0 SP3 for VMCD 6.0.3.7

not sure if this is what you were asking about 

[Fouadae]

if only there is a command to expand the default size maybe
i am trying to figure it out but i ran out of ideas and researches so far

[ghost]

You will need to check the Licenses -> Dimension Selection

its down the bottom of the list, default is 364, max is 2332.

I would suggest doing your homework before playing in this form. And backup before you do anything

[Fouadae]

thanks for your reply
I'v backped  and I tried to expand the dimension to 500 from 364 and it gave me this error message

"Insufficient memory for new dimension"

[LoopyLou]

Ok, this statement is confusing

"it is MXe 3300, I am using ISS, I used MSL and MCD 6.0 SP3 for VMCD 6.0.3.7"

Do you have a physical 3300 controller box?

[Fouadae]

solved
thanks for you all
it needed for expanding the dimension

Regarsd