Author Topic: Polycom 7000 Will not connect boot server  (Read 3616 times)

Offline johnlynch

  • New Member
  • *
  • Posts: 2
  • Country: au
  • Karma: +0/-0
    • View Profile
Polycom 7000 Will not connect boot server
« on: February 11, 2014, 01:37:22 AM »
Hi,

I've got a Polycom 7000 and I've found the attached instructions for how to set it up on my MITEL 3300. I'm having problems as the screenshots don't match the system I use, but I've done the best I can. I've attached a couple of screenshots to show what my interface looks like.

I cannot dial out and I cannot dial into it. I've checked and it's not the phone line (other phones work on it just fine). My phone flashes the time (haven't changed it), but it does have the phone number 131.

Any and all help would be greatly appreciated.


Offline johnkeri

  • Jr. Member
  • **
  • Posts: 56
  • Country: ca
  • Karma: +2/-0
    • View Profile
Re: Polycom 7000 Will not connect boot server
« Reply #1 on: February 11, 2014, 10:29:07 PM »
Hi John! Aren't you the lucky one.
Installed 7000 and 5000 units before and tell you they are fun.
Hope you registered on the Polycom website and have access to documentation and software.
Check the software version of the 7000, you might have to upgrade the firmware.
SIP is simple to program on the 3300, it is the Polycom that is painful.
Have two working on our network and can share notes with you tomorrow (NA Pacific time).
Questions:
- software on the Polycom, anything older than 3 has no LLDP support.
- voice network, VLAN?, LLDP?, DHCP? Need a provisioning server option for it to work.

Offline johnlynch

  • New Member
  • *
  • Posts: 2
  • Country: au
  • Karma: +0/-0
    • View Profile
Re: Polycom 7000 Will not connect boot server
« Reply #2 on: February 12, 2014, 02:48:54 AM »
Hi John! Aren't you the lucky one.
Installed 7000 and 5000 units before and tell you they are fun.
Hope you registered on the Polycom website and have access to documentation and software.
Check the software version of the 7000, you might have to upgrade the firmware.
SIP is simple to program on the 3300, it is the Polycom that is painful.
Have two working on our network and can share notes with you tomorrow (NA Pacific time).
Questions:
- software on the Polycom, anything older than 3 has no LLDP support.
- voice network, VLAN?, LLDP?, DHCP? Need a provisioning server option for it to work.
Hi John!

Thanks for the help. Here's my best to answer your questions:
* Version: 3.1.2.0392
* No VLAN or LLDP to the best of my understanding (although I am new here so I could be wrong!).
* Do have DHCP
* Not sure about a provisioning server. We do have a MITEL box.

Our current devices are setup as VOIPs and we do have an analogue Polycom that works. I'm attempting to setup this polycomm as a generic SIP though (to be used through VOIP).

My apologies if my answers are wrong/don't make sense.

Offline xrds

  • Jr. Member
  • **
  • Posts: 77
  • Karma: +0/-0
    • View Profile
Re: Polycom 7000 Will not connect boot server
« Reply #3 on: February 12, 2014, 12:53:23 PM »
Hi John,

I just configured 2 Polycom SoundStation IP 7000's, I configured them through the webconsole.

First I added/programmed them in the Controller as SIP phones and then finished programming them through the web console using Ip address of the polycom. 

Let me know if you need anything else.

Nanette

Offline johnkeri

  • Jr. Member
  • **
  • Posts: 56
  • Country: ca
  • Karma: +2/-0
    • View Profile
Re: Polycom 7000 Will not connect boot server
« Reply #4 on: February 12, 2014, 04:51:22 PM »
You can use Provisioning servers for large deployments to authenticate and firmware download and so on.
First thing it does at boot is to look for it. Use DHCP option 160 as IP address to specify one.
Used the IP of my PC and though it times out and does nothing, it will not boot without the option.
The software on ours is 3.3.4, you might consider upgrading yours. It is a bit painful, but gives you all the latest options.
If it is behind an MCD and ARS is set up, use digit string [0-9]x.T, will pass anything you dial.


 

Sitemap 1 2 3 4 5 6 7 8 9 10