Author Topic: Half/Full Duplex  (Read 3618 times)

Offline pakman

  • Sr. Member
  • ****
  • Posts: 483
  • Karma: +1/-0
    • View Profile
Half/Full Duplex
« on: January 15, 2014, 03:17:40 PM »
I've got two phones that when I looked at the config originally were set to half duplex under the Hardware Config section. I changed them to H/Full but when I save the changes and reboot and look at the port settings it only show half. Now the switch is setup to auto negotiate and I know this is working fine as I can plug in another phone and it boots up just fine and when I look at that phones Hardware Config section it shows it's Full Duplex under the LAN settings. Is there anything else I could try or maybe these two phones NICS are just shoot?

thanks,


Offline jrg0852

  • Sr. Member
  • ****
  • Posts: 309
  • Country: us
  • Karma: +3/-0
  • Look out for the next tech. because it may be you!
    • View Profile
Re: Half/Full Duplex
« Reply #1 on: January 15, 2014, 03:43:50 PM »
Try making the phone "Auto" and see if it takes on the hadshake from the POE switch.

Offline pakman

  • Sr. Member
  • ****
  • Posts: 483
  • Karma: +1/-0
    • View Profile
Re: Half/Full Duplex
« Reply #2 on: January 15, 2014, 03:59:27 PM »
The phone is already set to auto for the port negotiation.

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Half/Full Duplex
« Reply #3 on: January 15, 2014, 06:03:46 PM »
Did you try to factory default the phone via the menu?

Offline pakman

  • Sr. Member
  • ****
  • Posts: 483
  • Karma: +1/-0
    • View Profile
Re: Half/Full Duplex
« Reply #4 on: January 16, 2014, 11:35:02 AM »
Yes, I tried that.

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Half/Full Duplex
« Reply #5 on: January 16, 2014, 03:11:36 PM »
I saw this once... The fix was to flash it to another PBX & version (I have access to lots of different Mitel PBXs, in this case I used a newer 5000 system), then bring it back and let it reflash to the 3300 it was originally for. Otherwise I gotta go with a bad phone.

Offline pakman

  • Sr. Member
  • ****
  • Posts: 483
  • Karma: +1/-0
    • View Profile
Re: Half/Full Duplex
« Reply #6 on: January 16, 2014, 04:28:57 PM »
Thanks for the suggestion, I don't have another version but I will try taking it back and plugging it into another PBX to see what happens. Otherwise that was also my conclusion.

Thanks,


 

Sitemap 1 2 3 4 5 6 7 8 9 10