Author Topic: ONS line card state  (Read 1773 times)

Offline ewelton

  • Contributer
  • *
  • Posts: 24
  • Karma: +0/-0
    • View Profile
ONS line card state
« on: November 22, 2013, 09:09:45 AM »
Is there a command to check the state of the lines on an ONS line card that gives the details that running the STATE command on a DNI card gives?

Specifically what I am looking for is a command that will show if there isn't a device connected to the PLID in the same way that "out of service" could mean for a line on a DNI card. I do know that "out of service" can be something else than a device not connected and that it simply means that the line on that card is programmed but it doesn't sense a device connected to it.


Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: ONS line card state
« Reply #1 on: November 22, 2013, 09:38:07 AM »
No.  Analog ports have no way to show you if something is connected to it or not.

Ralph

Offline ewelton

  • Contributer
  • *
  • Posts: 24
  • Karma: +0/-0
    • View Profile
Re: ONS line card state
« Reply #2 on: November 22, 2013, 09:55:25 AM »
That's what I thought and was afraid of.

Thank you for confirming.


 

Sitemap 1 2 3 4 5 6 7 8 9 10