Mitel Forums > Mitel MiVoice Business/MCD/3300

Cannot log into ESM

<< < (3/3)

Tnobrien:
R7.

Mitel100:
Ok so you can log into the system via telnet but not the front end. In this case I don't think a reboot will work, but you never know. If this does not work, try a full shutdown and power up.

When I tried this problem in release 8ur5, the reboot of the controller did not work.

Tnobrien:
 I scheduled a reboot based on the recommendations of Ralph and it worked.  I had reset before and that didn't take.  Thanks to all here who contributed.  I will definitely stick around and help out the community where I can.

Navigation

[0] Message Index

[*] Previous page